How To Set Up An Eno With Atlas Straps

Download Article

Hawkeye'due south Nest Outfitters (ENO) is a popular brand of hammocks used for leisure and sleeping, while camping or in the comfort of your home or grand. The SingleNest, DoubleNest, and DoubleDeluxe hammock models all concur up to 400 pounds and are made of flexible nylon taffeta that is lightweight, comfortable, and quick-drying. The way you append your hammock will depend on how and where you want to utilize it. Acquire how to hang your ENO hammock safely wherever y'all are.

1
Find ii copse ten-12 feet apart. Look for ii trees that are almost ten-12 feet autonomously to hang your hammock when you lot're outdoors. The trees should exist alive and healthy with solid bawl and no overhead hazards.
- Choose trees that are at least a foot (12 inches) in diameter to ensure stability.
- Practice non use trees for mounting your hammock if they are closer together than 10 feet, equally your hammock may be too depression to the ground when weight is practical.
- Check with the administrators of the park or natural area you're in before hanging up your hammock. Some have rules and regulations regarding hanging hammocks, as information technology can touch on the health of trees.
2
Wrap SlapStraps on each tree. Take out your gear up of two ENO SlapStraps and attach 1 to each of your mounting trees. The straps should wrap around a broad function of the trunk, about 5 feet from the ground.
- To adhere a SlapStrap, wrap it around the trunk of a tree and hold an end in each paw. Thread one finish through the loop on the other terminate, then pull until the strap is tight effectually the tree torso. Do this with both straps/trees.
- You can use your ain rope or strap system instead of ENO'southward SlapStraps, but note that they may be more than difficult to put up or less safe.
Advertizement
3
Take extra precautions to protect trees. Ensure you are using SlapStraps properly equally discussed hither to avoid any negative impact on the copse you use to hang the hammock. Try placing sticks in between the strap and the tree to lessen friction.
- Gather a scattering of sticks from the ground in your surrounding surface area. They should be roughly the length of your forearm and of the same bore every bit one another. Note that you need their diameter to be thick enough to stick out from the bawl of the tree slightly.
- Hang your SlapStraps, and then place the sticks between the strap and the tree, all the way around, almost a hand'south width apart between each one.^[1]
4
Attach your hammock to the straps. Adhere your ENO hammock betwixt the copse past using the provided carabiners on each end of the hammock. Skid the carabiner into one of the five loops provided.
- Your ENO hammock comes with an aluminum wiregate carabiner at either end for attachment to straps. Push to open the gate to put it on i of the loops, then make sure the carabiner is fully closed effectually it.
- The five aligning loops available get in easy to adapt the meridian of the hammock. But choose a higher or lower loop depending on how far you want your hammock to be from the basis (recommended 18 inches or lower when occupied).
5
Exam and adjust the hammock. Slowly put weight on your hammock one time it has been fastened to the straps on the trees. Sit and then lay down fully in the hammock to determine if it is at the right tiptop.
- If you bear on the ground at all while in the hammock, it should be higher. Secure the carabiners to a higher loop on each SlapStrap. If you take no more available loops, you need to select trees that are farther apart.
- If it'due south difficult to get into your hammock to begin with, it should be lower. Attach the carabiners to a lower loop on the SlapStraps. If you have no more than lower loops, choose trees that are closer together, or purchase Atlas or Atlas 40 straps.
- The ends of your hammock should exist placed into loops then that they are level, or with a slight difference that's comfortable to you while you're lying down in it (for case, yous may like to have your caput slightly college).^[2]
Advertising

i
Observe two solid trees for mounting. Hang your hammock between 2 copse approximately 10-12 anxiety apart. The trees should be live with sturdy trunks of at least 12 inches diameter and no overhead hazards.
- The Atlas and Atlas 40 tin can be used to hang hammocks between copse that are farther apart due to the actress adjustment loops. However, a distance of ten-12 feet between the trees is generally ideal. Don't use trees closer than 10 anxiety apart.
- Check with the administrators of the park or natural area you wish you hang your hammock in start. They may accept rules or regulations about hammocks to protect the safety of trees.
2
Wrap Atlas straps around the copse. Use the 2 straps that come with ENO'due south Atlas system to secure the hammock to the copse. Wrap a strap around each tree nearly v feet from the ground.
- To secure an Atlas strap, pull the multi-adjustment finish (with minor loops at intervals along the strap) through the end that has the characterization and a unmarried larger loop. Pull it until the strap is tight around the tree trunk.
- You are welcome to use other straps or ropes to hang an ENO hammock in this way, simply it may not be every bit piece of cake, prophylactic, or adjustable.
3
Use sticks for extra tree protection. Ensure you are installing the Atlas straps properly as discussed here to avoid whatsoever damage to the copse you're using to hang your hammock. Place sticks in between the strap and the tree to lessen friction as an extra precaution.
- Gather a scattering of sticks from the footing in your surrounding area. They should each exist about the same diameter, and about the length of your forearm. Notation that you need the diameter to be thick enough that the sticks will beetle out from the bawl of the tree slightly.
- Hang your Atlas straps ordinarily, then place the sticks betwixt the strap and the tree, all the mode effectually the trunk, about a hand's width apart betwixt each one.^[iii]
four
Secure the hammock to the straps and adjust. Attach your hammock to the bachelor loops on each Atlas strap with the carabiners at either end. Accommodate the hammock to your desired height by changing which loops the carabiners fit into.
- Atlas straps have a combined total of thirty adjustment loops, while the Atlas Forty has an additional 10 loops and 54 inches of length for maximum aligning options.
- Your ENO hammock comes with two aluminum wiregate carabiners at the ends. Visually check that they are closed, and listen for a "click" before you put weight on your hammock.
- Slowly sit and lay on your hammock to examination the height and evenness. Move each carabiner to a higher loop if your hammock is as well low to the ground, a lower loop if your hammock is too high, or one or the other carabiner to a unlike loop if the two sides are uneven.
5
Use Helios straps for more than lightweight flexibility. Try out the ENO Helios straps if you demand an extra lightweight design for backpacking, or you lot have a tricky space for hanging. Helios uses a bury splice pattern for extra adjustability.
- Secure the straps to each tree like you lot would with SlapStraps or Atlas, except with Helios you will pull the thin stop made with strong Dyneema cord through the end with a thicker polyester strap.
- Slip each hammock carabiner through the small-scale loop end of the cord that's labeled "Identify hammock hither." And then pull the long end of the cord to adjust the hammock higher, or pull on the string between your hammock and the tree to conform it lower.^[4]
- Note that the Helios straps are designed to hold 300 pounds, rather than the 400 pound maximum that other ENO straps are designed for.
Advertisement

1
Detect two sturdy indoor or outdoor structures for the hanging kit. Hang a hammock more permanently indoors or outdoors in an surface area with a lack of suitable copse. Use a hanging kit to mount the hammock betwixt any two structures that incorporate wooden studs or other sturdy forest material.
- Find a space with a distance of about 112 inches between your two structures, where you can adhere the anchors for the hammock about l inches off the footing. Lay your hammock down on the floor betwixt the structures for reference, or concord information technology upwards in the infinite to make sure.
- Notation that the hanging kit from ENO is designed for use with potent wooden structures, like the wooden studs in a dwelling house wall. If you wish to hang your hammock from other structures, you lot should choose different screws and fittings designed for that material.
- Never install the hanging kit into copse, as it can severely impairment them.
2
Find studs for the hanging kit anchors. If you're hanging your hammock from two walls, yous need to locate wooden studs for the hardware. Use a hammer and smash to assistance you observe studs, or an electronic stud finder if you take ane.
- With a hammer, tap gently forth the wall and place your manus just in a higher place where you're borer to feel the vibration of the impact. When yous tap where there is a stud, the vibration volition be much less and the sound volition be a dull thud.
- You lot tin also apply features in a room to determine where studs are. Either edge of a window or door frame will always be on studs, and you can mensurate xvi" (typically) abroad from the center of any known stud to find the next one.
- To test whatever location yous believe to have a stud, hammer a sparse nail into the wall. If it meets resistance about ½ inch into it, there is a stud in that location. If it meets no resistance, there is merely hollow sheetrock, which will NOT be suitable for belongings up your hammock.
iii
Mark and drill into the wall. Use a pencil to mark where you want your hammock to hang from each wall (about 50 inches from the floor is recommended). Then drill a pigsty in the center of each stud with a 5/sixteen" drill bit.
- Make sure y'all will be drilling into the eye of a stud by making several more test holes close together on the wall. When you observe the edge of the stud, measure ¾ inch in to mark the eye, every bit a standard stud is 1 ½" wide.
- Using a drill with 5/sixteen" drill bit, drill direct into the stud for three inches.
iv
Attach the lag screws, anchors, and steel carabiners. Use a 9/16" wrench or a socket commuter to tighten the included hardware into the wall. Yous will tighten down an anchor with a lag screw into each of your drilled holes.
- Tighten the lag spiral until the anchor is snug confronting the wall, slightly compressing the sheetrock without damaging it.
- Supplant the aluminum carabiners that come with your ENO hammock with the heavy-duty steel carabiners provided with the hanging kit. Then attach the carabiners direct to the anchors to hang your hammock.
5
Opt for a hammock stand. Use a hammock stand for your hammock if you want a very simple process for hanging. Opt for a stand if you don't accept options for installing the hanging kit or using straps on trees, such as in an open indoor or outdoor area.
- Purchase a hammock stand up from ENO for easiest setup. Choose from a standard solo hammock stand, one that can agree three unlike hammocks, or a Roadie stand up that tin exist held upward by the wheels of a car for road trips.
- Yous tin use other hammock stands for ENO hammocks if you wish, equally long as the frame is about x feet long.
Advert

Enquire a Question

200 characters left

Include your e-mail accost to get a message when this question is answered.

Submit

Advertizement

Video

Purchase the Atlas EXT to add more length to whatever of the other strap systems.

Thanks for submitting a tip for review!

Advertising

Get assistance from a qualified professional person or person experienced with hanging hammocks if you are unsure most any of these methods, especially installing the hanging kit into walls.

Near This Article

Commodity Summary Ten

To hang an Eagle'south Nest Outfitters hammock, look for ii trees that are 10-12 feet apart and at to the lowest degree a foot in diameter. Wrap your straps around each tree about 5 feet off the ground. Put a few sticks vertically between each tree and its strap to protect the tree. Then, adhere your hammock to the straps using its carabiners. Examination the hammock by slowly putting your weight on it. If the hammock'south slightly as well high or depression, move the carabiners to different loops on the straps. For more tips, including how to permanently hang a hammock using a hanging kit, read on!

Did this summary help y'all?

Thank you to all authors for creating a page that has been read 253,119 times.

Did this article aid you?